![]() Necessary cookies are absolutely essential for the website to function properly. The engine shall be warranted by the engine manufacturer for a minimum of two (2) years. The ventilator shall have a minimum five (5) year warranty. The unit shall be tested to AMCA 240-15 for air movement, and the air movement shall meet 10,551 cubic feet per minute.ĭimensions: 23.5″ high x 23″ wide x 16.5″ deep (600 mm x 585 mm x 420 mm) The safety guards shall be designed to allow access to all the engine controls. Standards to prevent accidental contact with the blade. The front and rear safety guards shall be designed to OSHA and U.L. The ducting shall also be connected by a belted cuff for ease of use All ducting features coated polyester construction and includes a heavy-duty black wearstrip to protect the wire helix. The ducting is available in 16″ (lower cost) and 20″ (higher airflow) diameters. This must be a simple procedure with no tools required so it can be performed in emergency situations. The Smoke Ejector shall be designed to easily attach ventilation duct to the inlet and outlet side of the fan. Any ventilators utilizing belts, pulley, gears or additional shafts shall not be acceptable. ![]() The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. The blade shall be driven by the gas engine with a direct–drive connection. ![]() Plastic shall not be an acceptable blade material. Any ventilator using blades that cannot withstand the high heat typical on fire scenes shall not be acceptable. The blade shall be constructed of precision-cast aluminum alloy #713. The unit shall be supplied with a large fuel tank capable of holding fuel for extended running time on scene. The blade shall be driven by a 5.5 Horsepower Honda GX200 gas engine. The exhaust from the gas engine must also be remote from the airstream being moved by the fan blade. As such, the air intake must be separate from the airstream being moved by the fan blade, accomplished by a remote mounting of the air cleaner/air intake to an area of clean air. The unit shall be designed for use in smoked-filled conditions (Smoke Ejection). All components of the ventilator shall be 100% manufactured and assembled in the United States. The entire frame of the unit shall be constructed of steel and shall surround the seven-blade 18″ airfoil propeller to enhance lifting and user safety. The ventilator shall have four (4) stabilizing rubber feet to ensure the unit shall remain stationary while running at full speed. The unit shall be designed with two (2) top carrying handles on each corner for easy positioning and rapid deployment. The unit shall feature a square design for strength and stability. A Super Vac, part number #GP187S, 18″ gas-powered PPV / NPV shall be supplied.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |